Servis

Vertical Oriented Centrifugal

Chemical Pumps

Chemical transfer pump

Thermoplastic casing, up to 120 m³/h

The CGV-L vertical shaft, centrifugal pump series is designed to handle demanding applications. The components of the pumps in this easy-to-use series are produced in high thickness to ensure maximum reliability.

The pump shaft is connected to the motor through the bearing elastic coupling, guided through PTFE CG and Al2O3 (alumina) bushings; An alternative combination of SiC-SiC (silicon carbide) is also available on request.

Application

Sea Water, Sulfuric Acid (H2SO4), Hydrochloric Acid (HCl), Sodium Hypochlorite (NaOCl), Nitric Acid (HNO3), Caustic Soda (NaOH), Phosphoric Acid (H3PO4), Ferric Chloride (ZnCl2), etc.

Construction

The parts in contact with the liquid are made of plastic block (PP, PVDF) and the gaskets are made of (EPDM, FPM, FFKM).

Get an offer

Performance Data

Flow

m³/h

120

Pressure

mWc

5-40

Motor

1,1 - 18,5

Speed

rpm

950 - 1150 - 1450 - 1750 - 2900 - 3500

Operating Temperature

°C

-5 / +80

Application

Vertical Oriented

Impeller

Semi-open

Column Height

0,5 - 3

Construction Material

Chemical transfer pumps are manufactured from materials with high chemical and mechanical resistance such as PP, PE, PVDF, FRP.

PE-UHMW

0/+90 °C

-30/+90 °C

Polypropylene (PP) is a thermoplastic polymer used in a wide variety of applications. It has high mechanical and temperature resistance.

Ultra-high molecular weight polyethylene (UHMWPE, UHMW).

It provides very high chemical and mechanical resistance.

PVDF

-20/+120 °C

FRP

Polyvinylidene difluoride (PVDF) is a thermoplastic fluoropolymer.

PVDF is a specialty plastic used in applications requiring resistance to solvents, acids and hydrocarbons.

Fiber reinforced plastic (FRP; Fiber reinforced plastic) is a composite material made from a polymer matrix reinforced with fibres.

It is used in processes requiring mechanical and chemical resistance.

Processes

strong acids
ionic, salt solutions
halogenated compounds
hydrocarbons
aromatic solvents
aliphatic solvents
oxidants
bases

Applications

chemical processing
electricity, batteries and electronic components
construction and architecture
health and pharmacy
biomedical research
nuclear
petrochemical, oil and gas
food, beverage processing
water, wastewater management

Construction

Pump body made of high thickness PP or PVDF to ensure mechanical strength and chemical resistance.

Centrifugal impeller made of PP or PVDF; It offers a semi-open version for particle-laden fluids or a closed version for pumping solutions at high temperatures. Provides axial self-balancing guaranteed by rear counter-blades

Guide bushing made of PTFE CG (SiC available on request).

Al2O3 guide bushing (SiC available on request).

Termoplastic pipe.

Column made entirely of thermoplastic material.

The shaft, made of 42CrMo4 steel, is configured to support torsional and radial forces. It is completely covered with thermoplastic material.

Extra thick PP plate.

The aluminum intermediate adapter retains the bearings and elastic coupling and moves the motor away from the rest of the pump.

Radial bearings.

The elastic coupling is fitted to absorb any axial misalignment and allow removal of the motor without the need to remove the pump.

IEC three-phase asynchronous electric motor (NEMA available on request).

Performance Curves