Servis

Vertical Oriented

Centrifugal Chemical Pump

Chemical transfer pump

FRP casing, up to 650 m³/h

The Vitrum series is designed for mildly to severely corrosive liquids and harsh operating conditions. All parts in contact with the fluid are made of reinforced fiberglass material to ensure resistance to wear and severe temperatures between -10°C / 90°C.

The pump shaft, connected to the engine by an elastic coupling with internal bearings, is guided through PTFE CG and Al2O3 (alumina) bushings; An alternative combination of SiC-SiC (silicon carbide) is also available on request.

Application

Sea Water, Sulfuric Acid (H2SO4), Hydrochloric Acid (HCl), Sodium Hypochlorite (NaOCl), Nitric Acid (HNO3), Caustic Soda (NaOH), Phosphoric Acid (H3PO4), Ferric Chloride (ZnCl2), etc.

Construction

Fiberglass FRP-VES vinyl ester resin: Standard applications
Fiberglass FRP-VEA vinyl ester resin: Abrasive fluid applications
FRP-VEC vinyl ester resin: Bleaching applications
Fiberglass FRP-VEF vinyl ester resin: Fluoride applications
Fiberglass FRP-EPX epxy resin: Strong chemicals and solvent applications

Get an offer

Performance Data

Flow

m³/h

650

Pressure

mWc

5-90

Motor

1,1 - 160

Speed

rpm

950 - 1150 - 1450 - 1750 - 2900 - 3500

Operating Temperature

°C

-10 / +90

Application

Vertical Oriented

Impeller

Semi-open

Column Height

0,5 - 5

Construction Material

Chemical transfer pumps are manufactured from materials with high chemical and mechanical resistance such as PP, PE, PVDF, FRP.

PE-UHMW

0/+90 °C

-30/+90 °C

Polypropylene (PP) is a thermoplastic polymer used in a wide variety of applications. It has high mechanical and temperature resistance.

Ultra-high molecular weight polyethylene (UHMWPE, UHMW).

It provides very high chemical and mechanical resistance.

PVDF

-20/+120 °C

FRP

Polyvinylidene difluoride (PVDF) is a thermoplastic fluoropolymer.

PVDF is a specialty plastic used in applications requiring resistance to solvents, acids and hydrocarbons.

Fiber reinforced plastic (FRP; Fiber reinforced plastic) is a composite material made from a polymer matrix reinforced with fibres.

It is used in processes requiring mechanical and chemical resistance.

Processes

strong acids
ionic, salt solutions
halogenated compounds
hydrocarbons
aromatic solvents
aliphatic solvents
oxidants
bases

Applications

chemical processing
electricity, batteries and electronic components
construction and architecture
health and pharmacy
biomedical research
nuclear
petrochemical, oil and gas
food, beverage processing
water, wastewater management

Construction

Pump body made of high thickness FRP to ensure mechanical strength and chemical resistance.

Semi-open centrifugal impeller.

Guide bushing made of PTFE CG (SiC available on request).

Al2O3 guide bushing (SiC available on request).

Termoplastic pipe

FRP reinforced thermoplastic column.

Made from SS316 or 42CrMo4 steel, the shaft is configured to support torsional and radial forces. It is completely covered with thermoplastic material.

Extra thick PP plate reinforced with steel plate.

Intermediate adapter made of cast iron.

Elastic coupling that will absorb any axial misalignment and allow removal of the motor without the need to remove the pump.

Bearings for alignment of the shaft.

IEC three-phase asynchronous electric motor (NEMA available on request).

Performance Curves